Modifikasi Car End Motor 2012: September 2010

Kawasaki Edge

Gambar Motor Kawasaki Edge Baru

Kawasaki will be targeting young people
sporty as their target market. This is because both the design of the body until
Edge engine acceleration is more dynamic than the motor when ducks class
This was in the market. From its design alone, Edge's sporty with sharp lines.

Honda Zoomer Scooter Modifications

These two customized versions extend the Zoomer’s unique personality to two different kinds of scooting: a “Work Zoomer” equipped with cargo carriers that make it ideal for the urban delivery business, and a “Beach Zoomer” outfitted for hauling body boards and other fun-in-the-sun.

Specification
length(mm) 735(835)
wide(mm) 1,025(1,495)
hright(mm) 1,200
displacement(cm3) 49
engine water cooled 4 stroke single cylinder

Honda Zoomer Wallpaper

Honda Zoomer Picture

RICH COLOR RICH EFFECT HONDA VARIO

The concept does not actually offer grandiose, but the original idea. Initiated by aging brusher Wito Brush from Solo, dijejalilah diverse body of this motor circuitry typically graphical effects. The most obvious, bottom color that is made all-nano. Impression of color and not monotonous. Let more complete, given the color gradations are not too obvious, from pink, red to orange to yellow.
One Million wah effects can be displayed for any motor, let alone in the motor which had a body width matic and dynamic as this one Honda Vario Techno. Moreover, profiles and hollow body is pretty sporty performance supporting the airbrush graphics are displayed. Not surprisingly, CM57 squad apply this flow in the motor geberan Haryonogo Encang alias.
The most fresh, the combination of these colors are interspersed with other effects, including watersplash, thin smoke in every color to the word ‘motor chang’ which is made asymmetrical in some parts.

Special groove and the line itself does not irregular, but most are given the concept of minimalism with an additional flash as prinstrip indentation in the middle.
The best paint finishing election as any supporting Spieshecker final performance. Bright, cheerful and not monotonous. .: Punk / rob / neo

Brush spek
SOK DPN: Variations, discs DPN; Ninja Double disc, KALIPER / MASTER: RRSS / Standard, SOK BLK; Daytona, BLK discs: Ninja, MASTER / KALIPER: Nissin, a rim DPN / BLK; Bunbon 17, DPN BAN / BLK; Slick 50/90-17, filter: Koso, exhaust: CLD Racing. CAT / CLEAR: Spieshecker, BRUSHER: Wito Airbrush, modifier: CM57.

Kind Of Motorcycle Streetfighter from Midle Java in 2010

http://top-motorcycle-modification.blogspot.com/

modifikasi street fighter picture

When modifying the motor again invaded the flow of low-rider from skutik various brands, the region west part of Central Java, or so-called West Java Style (WJS) has its own characteristics. Streetfighter is a strong brand that is attached to the blood in the WJS builder with the work amounted to tens and even hundreds of units.

So, who pioneers in WJS streetfighter? Djanuar alias Agus Agus DJ, owner of Design XK arguably WJS streetfighter who pioneered the style typical of the tail stump. Hence, his work inspired many, ranging from 2009 to 2010, and he was obedient to monitor the development of European streetfighter.

In addition to cripple or a pointed tail, another particularity elongation flow is streetfighter wheelbase. This was the latest claim Agus against a white Honda GL 100.

Other WJS virus spreader is Mugi Eling (U'i) from Evolution Custom, Purwokerto. Problem design, his work almost setipe with Agus. The difference, he is more play in the body and distinctive design make diligent. For example the red Yamaha Scorpio.

Besides them, there Siswo Wonoto than Banyumas Wins, based in Paddock. Billy Custom joined jazz, but they are more concentrated with sport style. Finally, there are a Custom Bike Ripto. Honda Tiger shows black Pemalang WJS tastes quite thick. Ripto has the privilege of the plate material processing.

modifikasi streetfighter pictures 2

street fighter pictures 3

honda streetfighter pictures 4

2010 BMW G 650 Xcountry Specification

2010 BMW G 650 Xcountry pics 1

2010 BMW G 650 Xcountry pics 2

General information 2010 BMW G 650 Xcountry
Model:	BMW G 650 Xcountry
Year:	2010
Category:	Enduro / offroad
Engine and transmission
Displacement:	652.00 ccm (39.79 cubic inches)
Engine type:	Single cylinder
Stroke:	4
Power:	53.00 HP (38.7 kW)) @ 7000 RPM
Torque:	60.00 Nm (6.1 kgf-m or 44.3 ft.lbs) @ 5250 RPM
Compression:	11.5:1
Bore x stroke:	100.0 x 83.0 mm (3.9 x 3.3 inches)
Fuel system:	Injection. Electronic intake pipe injection / BMW engine management, twin spark ignition
Valves per cylinder:	2
Fuel control:	DOHC
Starter:	Electric
Cooling system:	Liquid
Gearbox:	5-speed
Transmission type final drive:	Chain
Clutch:	Multiple-disc clutch in oil bath, mechanically operated
Physical measures
Dry weight:	148.0 kg (326.3 pounds)
Weight incl. oil, gas, etc:	160.0 kg (352.7 pounds)
Seat height:	870 mm (34.3 inches) If adjustable, lowest setting.
Overall height:	1,915 mm (75.4 inches)
Overall length:	2,185 mm (86.0 inches)
Overall width:	907 mm (35.7 inches)
Wheelbase:	1,498 mm (59.0 inches)
Chassis and dimensions
Frame type:	Bridge-type steel section frame with bolted cast aluminium side elements, bolted-on aluminium rear section
Rake (fork angle):	28.5°
Trail:	116 mm (4.6 inches)
Front suspension:	Upside-down front fork, Ø 45 mm
Front suspension travel:	240 mm (9.4 inches)
Rear suspension:	Cast aluminium dual swing arm, central spring strut, spring-preload and rebound damping manually adjustable
Rear suspension travel:	210 mm (8.3 inches)
Front tyre dimensions:	100/90-S19
Rear tyre dimensions:	130/80-S17
Front brakes:	Single disc. Optional ABS. Double piston
Front brakes diameter:	300 mm (11.8 inches)
Rear brakes:	Single disc. Optional ABS. Single piston.
Rear brakes diameter:	240 mm (9.4 inches)
Speed and acceleration
Top speed:	170.0 km/h (105.6 mph)
Power/weight ratio:	0.3581 HP/kg
Other specifications
Fuel capacity:	9.50 litres (2.51 gallons)
Reserve fuel capacity:	3.78 litres (1.00 gallons)
Fuel consumption pr. 10 km (6.2 miles):	4.80 litres (1.27 gallons)
Color options:	Yellow/aluminium

Terminator Salvation Motorcycle Concept

The images are the concept of the Moto-Terminator, which shows a Terminator bot riding a motorcycle, the Ducati Hypermotard.

eCycle And Machineart Develop A Hybrid Motorcycle Concept

eCycle, Inc. and Machineart have collaborated on the design of a new hybrid motorcycle

platform concept for the aftermarket.

The Concept eCycle is a series hybrid featuring the eCycle SolidSlot? brushless motor/generator that can be used with variety of small displacement gas and diesel engines. The motorcycle operates much like a hybrid automobile in which both the engine and electric motor operate efficiently together. The electric motor is used for torque demands such as acceleration and passing and the gas or diesel motor for cruising and charging the batteries. It can be programmed for all electric operation for limited distances.

The purpose of the eCycle’s Concept program is to demonstrate eCycle’s

technology and produce a Hybrid motorcycle platform for sale to early adopter enthusiasts and the aftermarket for individual development. eCycle hasno plans to sell a complete motorcycle. Its primary interest lies in being a key supplier to those wanting to produce hybrid motorcycles, ATV’s and similar platforms.

Concept Design Goals:

1. Showcase the eCycle PLATFORM. The platform is the product, designed to be rational, rideable, and beautiful in its naked state.

2. Excite potential customers by designing complete vehicle variations showing PLATFORM design possibilities.

3. Visually express “Hybrid Technology”.
Industrial Design:

Machineart’s three appearance concepts show the multiple applications and styling possibilities of the eCycle platform. The rolling chassis components are common to all with variations only in body parts. All three evoke lightness and the image of an advanced vehicle.

Performance

eCycle estimates the hybrid will have the performance of a 250cc gas motorcycle, except top speed. Zero to sixty in 6 seconds and a top speed of 80mph. Fuel economy estimated at 150mpg with significantly lower emissions. A variety of engines may be used.

Specifications

* The front suspension is a single-sided swing arm design matched perfectly to the aluminum monocoque frame.
* The chassis is asymmetrical
* eCycle’s hybrid powertrain ideally lends itself to a forkless, single-sided front suspension.
* A SolidSlot? brushless motor/generator provides electric power - 42VDC up to 400A
* A wide range of engines is possible
* The battery bank consists of three 12 volt cells
* The Wheels are 16 x 3, CNC precision machined from pressure cast aluminum blanks manufactured by All American Wheel.
* The front brake is an inside-out rotor with an opposed piston caliper with Performance Friction pads and is integrated with the front suspension upright.
* The rear brake consists of a single-piston caliper with a floating rotor and Performance Friction brake pads
* The tires are Pirelli MT75; the front is 100/80-16 and the rear 120/80-16
* The 2 speed transmission designed by eCycle
* The final drive is Gates Polychain 30/71
* The fuel tank capacity is .90 gallons
* Front suspension is torsion complemented by a coil-over adjustable Penske Racing Shock
* The rear suspension is a coil-over adjustable Penske Racing Shock
* The wheelbase is 50 inches
* Fully programmable vehicle management system
* Weight is 220lbs (100kg)

Mantis Motorcycle Concept with Chopper Style

Mantis motorcycle concept takes advantage of existing technology to create a more aesthetically simple design to the modern chopper style bike. The hubless wheels create a simple feeling to the bike that is continued throughout the whole design. Each piece of the bike is designed to flow together to create a bike that looks fast and sharp, even when the bike isn’t moving. Well, what do you think? We are still curious with the hubless wheels design, is it really possible ? Let’s see if this motorcycle ever goes into production.

Custom motorcycle 'Old School'

Steampunk Motorcycles

What if technology had taken a different path? What if the steam powered technology of the Victorian era had continued on to the present day, offering up the same devices we use but with the metal, gears and wheels prevalent in those early machines? That's the idea behind steampunk, current day tech with a steam era look.

Because of the current high interest in steampunk, quite a few artists and craftsmen have built or modified everything from computers to wristwatches with a vintage sci-fi appearance. They're pretty neat, too, but I haven't seen many motorcycles that would fit the steampunk category, some come close, maybe, but more by chance than purpose.

The Bobster trike shown above has strong hints of it, something I didn't think about until I saw a few others comment and I would have to agree. Brass and copper are a strong design cue. Some point to the Confederate Wraith and when you step back for a second, yep, it has it too.

The Hubbard Steamcycle goes without saying, if you actually use steam power, you have ten points to begin with, add a little copper and brass and you're in.

The interesting machine on the right started as a drawing in a biker comic and the artist's brother thought it was so neat he decided to bring it to life. It doesn't actually run on steam but it looks like it should.

The single engine cylinder is from a tractor and it displaces 1440cc, think about what that sounds like! Tires and wheels are from a Ford Model A. The wooden fork is made of ash with forged iron strapping plus there's a shovel for a seat. Practical? Are you kidding? Cool? Of course.

There are other examples floating around out there, I only tossed out a few, but I think any design that focuses on the mechanical with a few added gears and wheels plus some brass and copper is pretty neat. Steampunk is all about the design and very little concerned with added (or lost) function but some of it would be neat if it worked half as well as you wish it would.

What are some of your favorites?

Buell Conversion Kit From Fusion Motorcycles

Remember "The Machine" from Fusion Motorcycles? Well, Will Thibeault has been hard at work on something a lot of you may find interesting, he's designed a conversion kit that will transform your donor Buell into a custom with killer looks.

Will's kit uses a billet T6 aluminum bolt together frame with a built in oil tank, a 60 inch wheelbase and 33 degrees of rake. The Buell Thunderstorm motor, Buell forks, Buell six piston caliper and Buell rear caliper, all come from the donor bike.

The bike shown in these photos is for a customer with a lot of custom touches, a hard carbon fiber seat (customer request, Will prefers padded), Piaa head lights..same as he used on The Machine, Will's own stainless pipes and Fusion Motorcycles billet 18" wheels, 240 on the rear and 130 up front. Rear turn signals are LED.

According to Will:

The future bikes will have front and rear carbon fenders, and will be totally road legal. The Frame kits will include: frame, seat, rear shock, swing arm, oil tank, and gas tank for $4,500. For less than $10,000 a person can build their own w/ the purchase of a donor Buell. We will build the complete bike "road legal" for $19,500 and there are always the options of whatever you could think of i.e. carbon wheel, S&S motors, front ends and Ti frames

There are quite a few guys building choppers and all sorts of bikes from Buell parts and pieces but, in my opinion, this kit has just the right look. There seems to be a Confederate Hellcat influence, which is a good thing since I like the Hellcat, but overall, for the money, I don't see how you could go wrong here. Anyone with a Buell who is thinking about getting another bike, might want to consider this kit first, you get a completely different look and you already own half of the necessary parts. I like this, a lot. I have to think a lot of guys are going to start looking for a good used Buell and making a bit of work room in their garage. Nice work, Will!

UPDATE: Will Thibeault has added a few comments below about his kit

UPDATE 2: Will just let me know that the kit will not be ready until sometime in 2009. He is redesigning some parts and he is going to thoroughly test everything before offering the kits for sale.

Twindian – Twin Engine Indian Motorcycle

One of the comments on yesterday's post about the V4 custom mentioned the Twindian, a twin engine 1916 Indian. One look at this and I agree, it's far better looking and shows the kind of cool work they were doing a long time ago.

According to the story on the site, the Twindian was built sometime in the 1920s by Bill Arnold who joined two 61 cubic inch 1916 PowerPlus engines together to make the V4. He also widened the gas and oil tank to provide for the extra engine. Evidently, the bike ran fine and he used it for quite a while before finally parking it. Bill passed away in 1985 and his widow had to find a place for his many mechanical treasures and it was entrusted to Doug King who had it restored to its present condition. The "before" photos on the site show how much work they had to do and it looks like they did a great job.

Even with all of the interest in old motorcycles you have to wonder how many treasures like this are sitting in old barns somewhere, waiting to be discovered.

Thanks for the pointer, Willie!

Boss Hoss Pictures Design

General information
Model:	Boss Hoss BHC-3 LS3
Year:	2010
Category:	Custom / cruiser
Rating:	Do you know this bike? Click here to rate it. We miss 2 votes to show the rating.
Safety:	See our safety campaign with the high safety rated bikes in this category.
Engine and transmission
Displacement:	6200.00 ccm (378.32 cubic inches)
Engine type:	V8
Stroke:	4
Power:	445.00 HP (324.8 kW)) @ 5750 RPM
Torque:	603.42 Nm (61.5 kgf-m or 445.1 ft.lbs) @ 4750 RPM
Compression:	10.7:1
Fuel system:	Injection. Multi-port injection
Fuel control:	DOHC
Cooling system:	Liquid
Transmission type final drive:	Belt
Physical measures
Dry weight:	528.4 kg (1,165.0 pounds)
Overall length:	2,616 mm (103.0 inches)
Wheelbase:	2,032 mm (80.0 inches)
Chassis and dimensions
Rake (fork angle):	33.0°
Front suspension:	Inverted forks, 63 mm, adjustable preload,
Rear suspension:	Dual 13.0 inch coilover shocks, adjustable preload
Front tyre dimensions:	130/90-16
Rear tyre dimensions:	230/60-15
Front brakes:	Double disc. Dual 4-piston caliper
Front brakes diameter:	320 mm (12.6 inches)
Rear brakes:	Single disc. 4-piston caliper
Rear brakes diameter:	320 mm (12.6 inches)
Exhaust system:	2.5 inch with dual mufflers
Speed and acceleration
Power/weight ratio:	0.8421 HP/kg
Other specifications
Fuel capacity:	32.17 litres (8.50 gallons)
Further information
Parts and accessories	Check out parts and accessories from our partners.
Ask questions	Join the 10 Boss Hoss BHC-3 LS3 discussion group.
Insurance, loans, tests	Check out insurance here. Search the web for dealers, loan costs, tests, customizing, etc.
Related bikes	List related bikes for comparison of specs